Accessories saws

Suitable for series WE / WEK / WS / WSK / WTS / WTSK / RS / RSK

 

Pneumatic wheels for circular saws
With the pneumatic wheels it is easier to move the circular saw on rough terrain (e.g. gravel path, meadow, etc.) than with the standard wheels installed. When ordering “original equipment”, the chassis parts are immediately installed on the new device. Available for series WS 7 – WSK 7 – WSK 7G – WSK 7A – WSK 7V – WTS 7 – WTSK 7 – WTSK 7A – RS 7 – RSK 7. The wheels can also be mounted on older HMG circular saws, from 2009 onwards light. Weight 3.2kg.

  • Pneumatic wheels for circular saws (original equipment), order no. 682 210
  • Pneumatic wheels for circular saws, order no. 682 212
 
Solid rubber wheels for circular saws
With the airless solid rubber wheels, moving the circular saw on slightly impassable terrain (e.g. gravel path) is easier than with the standard wheels fitted. When ordering “original equipment”, the chassis parts are immediately installed on the new device. Available for series WS 7 – WSK 7 – WSK 7G – WSK 7A – WSK 7V – WTS 7 – WTSK 7 – WTSK 7A – RS 7 – RSK 7. The wheels can also be mounted on older HMG circular saws, from 2009 onwards light. Weight 10.8kg.

  • Solid rubber wheels for circular saws (original equipment), order no. 682 216
  • Solid rubber wheels for circular saws, order no. 682 218
Off-road chassis for circular saws
The retractable chassis with pneumatic wheels is ideal for moving the circular saw on rough terrain in an effortless manner. Together with the standard chassis, transport is also very easy because the entire weight of the machine sits on 4 wheels. When ordering “original equipment”, the chassis parts are immediately installed on the new device. Available for series WS 7 – WSK 7 – WSK 7G – WSK 7A – WSK 7V – WTS 7 – WTSK 7 – WTSK 7A – RS 7 – RSK 7. The wheels can also be mounted on older HMG circular saws, from 2009 onwards light. Weight 7.4kg.

  • Off-road chassis for circular saws (original equipment), order no. 682 230
  • Off-road chassis for circular saws, order no. 682 232
Tractor chassis for circular saws
The 2-wheel chassis with large 400mm pneumatic wheels and a drawbar with ball coupling is ideal for transporting the machine with a towing vehicle (e.g. tractor). The pull rod can be moved inwards or removed to save space. When ordering “original equipment”, the chassis parts are immediately installed on the new device. Available for series WS 7 – WSK 7 – WSK 7G – WSK 7A – WSK 7V – WTS 7 – WTSK 7 – WTSK 7A. The wheels can also be mounted on older HMG circular saws; assembly is easy from year 2009 onwards. Weight 7.4kg.

  • Tractor chassis for circular saws (original equipment), order no. 682 234
  • Tractor chassis for circular saws, order no. 682 235
Drawbar chassis for circular saws
The attachable drawbar chassis is ideal for moving the circular saw on firm ground in an effortless manner. Together with the standard chassis, transport is also very easy because the entire weight of the machine sits on 4 wheels. For the WS 7 – WSK 7 – WSK 7G – WSK 7V – WTS 7- WTSK 7- RS 7 – RSK 7 series, a fixing rod is required, which is already attached to the three-point hitch as standard for the WSK 7A and WTSK 7A series. Weight 16kg.

  • Drawbar chassis with fixing rod for circular saws, order no. 682 238
  • Drawbar chassis for circular saw WSK 7A – WTSK 7A, order no. 682 240
Hip roller for rocker saws
A hip roller is ideal for reducing fatigue when cutting. When ordering “original equipment”, the parts are immediately installed on the new device. Available for series WE 7 – WEK 7 – WS 7 – WSK 7 – WSK 7G – WSK 7A – WSK 7V – WSK 7F – WTS 7 – WTSK 7 – WTSK 7A. Weight 6kg.

  • Hip roller for rocker saw (original equipment), order no. 682 310
  • Hip roller for rocking saw, order no. 682 312
 
Rocker saw elevation
The firmly screwed elevation is ideal for people over 1.80 m tall so that they can work with the rocking circular saw in a way that is easier on their backs. The saw can be increased by 6cm, 12cm or 18cm, which can be adjusted later. When ordering “original equipment”, the increase is immediately installed on the new device and set to 12cm. Available for series WS 7 – WSK 7 – WSK 7G – WSK 7A – WSK 7V – WTS 7 – WTSK 7 – WTSK 7A. Weight 14kg.

  • Rocker saw elevation (original equipment), order no. 682 260
  • Rocker saw elevation, order no. 682 262
Rocker extension screwable
The screwable rocker extension is ideal because it extends the rocker and therefore makes it even easier to load wood. Section markings in the rocker (25, 33 and 50cm) are used to precisely determine the desired section length and make a stop unnecessary. Available for series WE 7 – WEK 7 – WS 7 – WSK 7 – WSK 7G – WSK 7A – WSK 7V – WTS 7 – WTSK 7 – WTSK 7A. Weight 4.2kg.

  • Rocker extension screwable, order no. 682 280
Rocker extension with wheels
If wood with a length of more than 1m is processed, the wood support device (rocker) on the rocker saw must be extended according to regulations. The rocker extension, which can be extended up to 50cm, can be attached to all HMG rocker saws. The robust construction with solid sliding rollers allows even heavier logs to slide easily to the cutting device. Available for series WE 7 – WEK 7 – WS 7 – WSK 7 – WSK 7G – WSK 7A – WSK 7V – WTS 7 – WTSK 7 – WTSK 7A. Weight 7.8kg.

  • Rocker extension extendable (original equipment), order no. 682 266
  • Rocker extension extendable, order no. 682 268
Extension cable with branded plug
The 400 volt and up to 12 kW extension cable is equipped with a heavy rubber protective jacket, CEE brand plug and brand coupling. Power: 400V/16A/2.5mm/5-wire/IP44/ H07RN-F.

  • Extension cable 10m, weight 3.4 kg, order no. 887 110
  • Extension cable 15m, weight 5.1 kg, order no. 887 115
  • Extension cable 25m, weight 8.5 kg, order no. 887 120
 
PTO shaft
The PTO shaft can be adjusted from 560 mm to 860 mm in length. The 1 3/8 inch connections are attached to the PTO shaft connection with a sliding pin. The drive shaft is secured against twisting with a chain. A shorter length can also be achieved by sawing off the shaft.

  • PTO shaft (560-860 mm), weight 7.1 kg, order no. 887 210
 
Three-point suspension rear and side connection
For easier transport, the three-point hitch with rear and side connection can also be used on an HMG circular saw without a PTO drive. The three-point suspension is primarily used on combined rocker table saws. Available for series WS 7 – WSK 7 – WTS 7 – WTSK 7.

  • Three-point suspension rear and side connection, order no. 687 310
 
Three-point hitch side connection
For easier transport, the three-point hitch with side connection can also be used on an HMG circular saw without a PTO drive. The three-point suspension can be mounted on rocking circular saws or combined rocking table saws. Available for series WS 7 – WSK 7 – WTS 7 – WTSK 7.

  • Three-point suspension side connection, order no. 687 312
 
Three-point hitch rear connection
For easier transport, the three-point hitch with rear connection can also be used on an HMG rocker circular saw without a PTO drive. The three-point suspension can only be mounted on rocking circular saws. Available for series WS 7 – WSK 7.

  • Three-point suspension side connection, order no. 687 314
 
Chip extraction device SG 2500
For a clean workplace, wood chips can be vacuumed up with the powerful SG 2500 blower. The mobile HMG suction device SG 2500 is powered by a 2.25kw 400V electric motor and has a suction capacity of 2500m³/h. The chips are sucked out of the circular saw via a 2m long hose and ejected via a 5m long hose. Weight 27kg.

  • Chip extraction device SG 2500, order no. 687 410
Chip extraction connection
To ensure a clean workplace, wood chips can be vacuumed up with a powerful blower. The chip extraction connection can be easily installed on any HMG circular saw. Instead of the prescribed chip protection grille, the suction connection is installed.

  • Chip extraction connection 100mm for series WE 7 – WEK 7, order no. 687 422
  • Chip extraction connection 100mm for series WS 7 – WSK 7 – WSK 7G – WSK 7A – WSK 7V – WSK 7F – WTS 7 – WTSK 7 – WTSK 7A, order no. 687 424
  • Chip extraction connection 100mm for series RS 7 – RSK 7, order no. 687 426
Saw table 1300×850 mm
Wooden boards or pallets can be processed on the large saw table. The table is equipped with a longitudinal and transverse stop and a large table extension. The switch from table to rocking operation works quickly. Available for series WS 7 – WSK 7 – WSK 7A.

  • Saw table 1300×850 mm, order no. 682 510
Peeling blade made of solid steel
In order to be able to sharpen and peel piles conveniently, the tool is equipped with 4 paring knives
600mm large peeling blade installed in an HMG table saw. Via an inclined feed table
The wooden posts are laid out and prepared. Available for series WTS 7 – WTSK 7 – WTSK 7A.

  • Peeling blade solid steel 600×4/5.5×30 mm, weight 9.4 kg, order no. 686 210
  • Feeding table for peeling sheet, weight 2.9 kg, order no. 682 516
Round wood trimming device
With the round wood trimming device mounted on an HMG table saw, round wood can be easily cut
be halved or trimmed. Available for series WTS 7 – WTSK 7 – WTSK 7A.

  • Round wood trimming device, weight 4.5 kg, order no. 682 518
Operating hours counter for PTO drive
The operating hours counter is installed in a robust housing. The encoder is mounted on the PTO connecting shaft. The display can be selected between PTO speed and operating hours.

  • PTO shaft operating hours counter (original equipment), order no. 887 140
  • PTO shaft operating hours counter, order no. 887 141
Electric drive systems as a retrofit kit
An electric motor can be retrofitted to an existing PTO drive on every HMG circular saw. The engines are delivered ready for operation.

  • Drive system E-motor 5.5kw direct drive with saw blade flange and switch, order no. 687 504
  • Drive system E-motor 7.5kw direct drive with saw blade flange and switch, order no. 687 506
  • Drive system E-motor 10kw direct drive with saw blade flange and switch, order no. 687 508
  • Drive system E-motor 7.5kw V-belt drive with switch and V-belt pulley, order no. 687 514
  • Drive system electric motor 10kw V-belt drive with switch and V-belt pulley, order no. 687 516
PTO drive systems as a retrofit kit
A PTO drive can be retrofitted to an existing V-belt electric drive on almost every HMG circular saw.

  • Drive system PTO shaft model G with brake and three-point hitch, order no. 687 525
  • Drive system PTO shaft model A (2 PTO shaft connections) with brake and three-point hitch, order no. 687 525
Telescopic conveyor belt as a retrofit kit
Conveyor belt parts can be retrofitted to an existing V-belt electric drive on almost every HMG circular saw.

  • Base frame GKF for saw/conveyor belt, order no. 687 350
  • Telescopic conveyor belt TF 4, belt length 4m, without drive, order no. 811 110
  • Telescopic conveyor belt TF 4-D, belt length 4m, electric motor 0.75kw 400V, order no. 811 120
  • Telescopic conveyor belt TF 4-W, belt length 4m, electric motor 0.75kw 230V, order no. 811 121
  • Telescopic conveyor belt TF 4-T, belt length 4m, tractor hydraulic connection V+R, order no. 811 122
  • Surcharge for 5m conveyor belt instead of the standard 4m conveyor belt, order no. 882 110