Wood splitters 7t 58/136cm

Hydraulic log splitter with 7t splitting power for length to 136 cm
Compact and Robust! The hydraulic log splitter with 7t splitting force is the entry model in the splitting technique of HMG. Not only outstanding design and handling, but above all to selected quality components such as Hydraulic pump and cylinders, etc., has been paid in the design features which enable a smooth gap operation is ensured. Compliance with the machinery directives such as the incorporation of special sliding guides between mast and base frame to avoid friction wear, is of course with us, as well as a large oil tank and pump support with rubber coupling between electric motor and hydraulic pump. It would be possible, if later times more power is needed to upgrade the 7t to an HSP 9 or HSP 10.

● Forward Speed 7 km / sec
● return speed 28 cm / sec
● Power demand Tractor 6 kw
● Dimensions (WxHxD) 650x1560x930 mm Lifting retracted 1050 mm
● Robust and solid construction
● Standard with driving means
● Long splitting blade made of special steel
● Clean filtration through return filter
● Fast oil filter change
● Special arrangement of the suction pipe in the oil tank, for better oil circulation
● oil drain valve for rapid hydraulic oil change
● bell housing with rubber coupling between electric motor and hydraulic pump
● Switch-plug combination with phase inverter and motor protection
● special sliding guides between mast and frame
● variable stroke limiter for log length adjustment
● Two-hand control with sliding mechanism
● Large opening of the two-hand control
● Two-hand operation with flexible rubber wood holders to avoid entanglements with very knotty wood
● Additional drive system (for example PTO) retrofittable

ZB100_HSP10M-Heimw_16

In the Magazine 06/2014 “Heimwerker Praxis” of HMG wood splitters HSP 10M-DZ was honored as “top class”!

ZB100_HSP10M_Besto_16

The Magazine “Heimwerker Praxis” has the HMG wood splitter HSP 10M-DZ recognized as the best product in the category “Wood Splitters”!

Basic equipment:

ZB_11_GAusst_16

Special equipment:

ZB_11_Tisch_SB_16

ZB_11_Bodenpl_16

ZB_11_Tisch_SU__16

Info:

ZHW16_13

 

 

The HSP 7, HSP 9 and HSP 11 wooden splitters are equipped with a compact and light short-grain table, as well as a foot cover. The maximum gap height is 58 cm, which can be increased to 136 cm by means of the special accessory “Surcharge floor plate with special knife”. The floor plate could also be retrofitted at a later date.

 

 

 

We recommend: A 30 cm wider gap table (Order No. 710810) for short timber can be used for an extra charge. Who splits only small pieces of wood, is also the lighter basic in the basic equipment!

 

 

 

A floor slab with a special knife is required for splitting logs (up to 136 cm in length). For an extra charge (order no. 710815), this is installed and delivered on the basis of the basic model.

 

 

 

Ideal accessories “Swivel table bottom, order no. 710825” for splitting log timber

 

 

 

 

A possible required 2nd splitting operation can be carried out effortlessly by swiveling the swivel table “Surcharge swivel table down” as a special accessory and using special knives

ZHW16_12  

Wooden splitters with power take-off or tractor hydraulics are equipped with three-point suspension and a large oil tank 11l as standard

ZHW16_1  

Also available with petrol or diesel engine

Wood splitter type HSP 7-W HSP 7-D HSP 7-Z HSP 7-DZ HSP 7-T HSP 7-B
E-Motor kw/Volt S6 CEE 16A 3,0/230 3,0/400 – – – 3,0/400 – – – – – –
PTO connection – – – – – – ja ja – – – – – –
Tractorhydr. pump max. 15l/min. – – – – – – – – – – – – ja – – –
Power input kw – – – – – – 6 – – – 6 – – –
Petrol engine B&S kw – – – – – – – – – – – – – – – 7,1
Diesel – – – – – – – – – – – – – – – – – –
Splitting power t 7 7 7 7 7 7
Log length max. mm 1360 1360 1360 1360 1360 1360
Splitting stroke mm 520 520 520 520 520 520
Splitting speed cm/s. 7 7 7 7 7 7
Return speed cm/s. 28 28 28 28 28 28
Weight kg 128 130 136 160 131 141
Art.-No. H 70550 H 70551 H 70552 H 70553 H 70554 H 70555
Surcharge for a wide table, easy to hang up and 30cm wider than standard table, weight 21kg, order no. 710810
Surcharge floor plate with special knife, thus can be split up to a length of 136cm, weight 36kg, order no. 710815
Surcharge swivel table top, easy to hang up and comfortable short wooden columns, since the table is only swiveled, 23kg, order no. 710820
Surcharge swing table at the bottom, so that meter wood can be easily processed with a 2 splitting process, weight 14kg, order no. 710825
Surcharge fixing unit for two-hand operation (handle remains in a certain position, so that it can be leaned against the wooden frame), order no. 710840

 

ZB_HSP-Sicherh_165 HMG machines are designed and manufactured according to principles valid machine guidelines. each machine a functional check is subjected to prior to delivery.