Wood splitters 9t 58/123cm

with enough power to split wood

The HMG short and meter log splitter of the HSP 9F series is built for longer operations in order to be able to process firewood up to 123cm in length. With a splitting force of 9t, even more difficult splitting performances can be called up. Pieces of wood up to 58cm in length can be split with the short wood table and up to 123cm without a table with an attached meter splitting knife. An easy-to-use two-hand control with shock-proof rubber wood holders enables simultaneous HOLDING and SPLITTING without having to fix the wood separately. The robust and welded construction ensures maximum stability. A transport handle and wheels allow easy transport.

  • Solid construction
  • Simple log lifter
  • Automatic return stroke (does not have to be initiated separately!)
  • Infinitely variable stroke limitation
  • Special splitting knife made of Hardox steel
  • Easier transport thanks to foldable table extensions
  • Big wheel chassis
  • Stable transport handle
  • Clean filtration through a return filter
  • Quick oil filter change
  • Oil drain valve for quick and easy hydraulic oil change
  • Powerful electric motor with a smooth running 1400 rpm
  • Pump bracket with coupling between electric motor and hydraulic pump
  • Switch-plug combination with phase inverter and motor protection
  • Protected vertical arrangement of the drive systems
  • Additional drive system (e.g. PTO drive) can be retrofitted at any ti
A robust and welded steel construction ensures maximum stability. All HMG wood splitters are powder-coated and go through a complex process (sandblasting, immersion baths, priming) before painting.
An easy-to-use two-hand control with shock-proof rubber holders enables simultaneous HOLDING and SPLITTING without having to fix the wood separately.
Logs can be placed on two large tables. For easier transport, the tables are simply folded down and fixed.
To get logs in a split position, a simple mechanical log lifting device, which is connected to the splitting knife via a steel chain, helps. If the splitting knife is moved upwards, the steel chain lifts the trunk until it is in the split position.
To avoid unnecessary splitting strokes, the splitting knife can automatically be stopped in any position. The stepless adjustment is set by means of a guide (no chain that can break)
The long splitting knife is made of special steel (Hardox) and withstands the high loads better than ordinary steel. The attachable splitting knife for meter wood is also made of Hardox steel and specially shaped so that meter wood can be split effortlessly.

The integrated chassis with two large wheels and a wide transport handle guarantee easy transport. Many different trolleys are available as accessories.
The smooth-running and powerful electric motor, which runs at only 1400 rpm, is equipped with a switch-plug combination, motor protection and phase inverter. A rubber coupling between the electric motor and the hydraulic pump protects the pump shaft from damage or leaks. A bellhousing keeps heat build-up between the engine and the hydraulic pump apart.
For the longevity of the hydraulic system, a very fine oil filter is built in, which filters the smallest dirt particles and thus avoids deposits that could later lead to damage. An oil and filter change can be carried out quickly and easily using a drain plug on the oil tank and by opening the cover on the filter housing.

 

An adjustable three-point linkage for CAT I and II are standard on PTO-driven implements. For easier transport, the three-point suspension can also be fitted to purely electrically powered log splitters.
The electric motor and PTO are installed in a vertical and narrow position, which protects against damage during transport in the forest.

 

Subsequent retrofitting of structural components is possible at any time due to the modular system.
Wood splitter type HSP 9F-D HSP 9F-Z HSP 9F-DZ HSP 9F-T HSP 9F-B HSP 9F-W
E-Motor kw (400 Volt S6 CEE 16A) 3,6 – – – 3,6 – – – – – – – – –
E-Motor kw (230 Volt S6) – – – – – – – – – – – – – – – 3,0
PTO shaft (200-350 U/min) – – – ja ja – – – – – – – – –
Tractorhydr. pump max. l/min. – – – – – – – – – 15 – – – – – –
Power input kw – – – 6 6 6 – – – – – –
Petrol engine Briggs & Stratton kw – – – – – – – – – – – – 7,1 – – –
Splitting power t 9 9 9 9 9 8
Wood length with table cm 58 58 58 58 58 58
Wood length without table cm 123 123 123 123 123 123
Splitting stroke cm 52 52 52 52 52 52
Speed cm/sec 7 6 7 / 6 5 7 6
Speed return cm/sec 23 21 23 / 21 15 24 21
Weight kg 209 215 239 210 220 209
Dimensions cm (L×W×H) 93×65×156 113×85×156 113×85×156 113×85×156 143×65×156 93×65×156
Order no 711 330* 711 331 711 332 711 333 711 334 711 335

* Bestseller

The newspaper “MOTOR & MASCHINE” tested an HMG wood splitter HSP 13M-DZ (new model HSP 14M-ZD) in its 2/2020 issue and rated the device as “master class” with a grade of 1.3 “very good”. An excerpt of the assessment: “… the log splitter HSP 13 M-DZ from HMG convinced us with good workmanship and absolutely solid work performance …”
The newspaper “MOTOR & MASCHINE” tested an HMG log splitter HSP 18ML-DZ (new model HSP 19M-ZD) in its 3/2016 issue and rated the device as “master class” with a grade of 1.3 “very good”. An excerpt from the assessment: “… working with the HMG 18 ton wood splitter is just fun. The device works like the proverbial clockwork. The question of more power never arises – on the contrary, one is happy about … “
In the 6/2014 issue of the test magazine “Heimwerker Praxis”, the HMG wood splitter HSP 10M-DZ (new model HSP 11M-ZD) was recognized as “top class” and “that’s mechanical engineering as it should be”!
ZB100_HSP10M_Besto_16 The test magazine “Heimwerker Praxis” has awarded the HMG wood splitter HSP 10M-DZ (new model HSP 11M-ZD) as the best product in the “wood splitter” category!
HMG machines are designed and manufactured according to the principles of valid machine guidelines. Every machine is subjected to a functional check before delivery.