Tilting saw conveyor e-motor

Cutting firewood at its best

The HMG tilting circular saw with 4m or 5m telescopic conveyor belt is driven by electric motor via a V-belt system (except WS 7F-8, direct drive) and the transmission achieves a higher saw blade speed, which makes cutting firewood even faster and easier. The V-belt system protects the electric motor and increases work safety. Thanks to the welded square steel tube frame, it achieves the highest level of stability. The cutting protection device can be opened wide for convenient operation. The system protected by a utility model (DE 20 2020 100 105.1) also has a very large opening of the rocker, which enables light wood fitting. The rocker is ergonomically designed and easy to operate thanks to integrated tension springs. The conveyor belt is driven by its own electric motor, which is connected to the circular saw motor. The conveyor belt is extended from its compact transport position to the working position with maintenance-friendly hand winches and adjusted to the desired ejection height. The conveyor belt consists of special nubbed textile segments, which ensure that the conveyed goods are transported away more quickly. Another special advantage lies in the construction of the wood feed shaft, because the piece of leftover wood that no longer needs to be cut and remains in the rocker does not have to be thrown into the feed device by hand, but can simply be pushed through with the next log to be cut . Subsequent retrofitting of structural components is possible at any time (e.g. PTO drive to the electric motor).

  • More work safety through V-belt drive
  • Powerful electric motor in a stable cast iron housing with reinforced base
  • Switch-plug combination with reinforced brake electronics, motor protection and phase inverter
  • Large opening of the feeding device (rocker)
  • Three-point suspension for CAT I and II as standard
  • High cutting depth of 28 cm thanks to a large saw blade with a diameter of 70 cm (30 mm hole)
  • Wide rocker with internal galvanized rocker plate
  • Smooth rocker thanks to strong tension springs and shock absorbers
  • Individually adjustable rocker handle
  • Stop firmly mounted with screws, no slipping possible
  • Removable chip ejection grid for quick removal of wood and bark residues
  • Compact transport position, only 1.65 m wide
  • A robust square steel tube construction ensures maximum stability. The welded frame is torsion-resistant and withstands the large cutting loads better than a sheet metal construction. A high-quality powder coating protects against rust.
  • The cutting protection device can be opened wide for convenient operation. The system protected by a utility model (DE 20 2020 100 105.1) also has a very large opening for the wooden support device (rocker), which enables light wood assembly.
  • A circular saw driven by a V-belt has a better cutting performance, because the built-in transmission results in a higher saw blade speed. In addition, work safety is increased if the V-belts can slip when blocked. The V-belt shaft is equipped with two self-lubricating industrial ball bearings and has a long bearing, which withstands the loads better than a short shaft. The V-belts are arranged on the outside, so a quick V-belt change can be carried out and the saw shaft does not have to be laboriously dismantled.
  • The rocker is designed ergonomically and smoothly and is easy to operate thanks to integrated tension springs. Galvanized exchangeable sheets protect the support device from wear.
  • The saw blade protection hood can be swiveled backwards in just a few simple steps, thus enabling the saw blade to be changed very quickly without having to laboriously dismantle the circular saw. The tool for changing the saw blade is securely attached to the machine for transport.
  • To determine the desired section length (25cm, 33cm, 50cm), the stop is firmly fixed with 2 screws and can therefore not be accidentally adjusted during the sawing operation.
  • An extension that can be pulled out up to 50cm is ideal so that the cut wood does not fall on the floor and at the same time serves to determine the desired section length.
  • The compact design makes it easy to transport. In the transport position, the machine is only 1.65 m wide, 2.55 m high (can be shortened by swiveling the conveyor belt!) And 1.40 m deep.

 

Large rocker opening

Quick saw blade change

Fixed mounted stop

Removable chip ejection grid

Compact transport position, only 1.65 m wide

 

Rocker circular saw type WS 7F-8 WSK 7F-8
E-Motor kw (400 Volt S6 CEE 16A) 7,5 7,5
Number of revolutions rpm. 1400 1680
Cutting depth rocker ca. cm 26 28
Saw blade cm 70/3 70/3
Weight kg 413 447
Dimension cm (l×w×h) 165×140×255 165×140×255
Purchase number with chrome-plated steel KV, teeth 56 616 320 616 340
Purchase number with carbide LFZ, teeth 42 616 321 616 341*
Purchase number with carbide SWZ, teeth 84 616 322 616 342
In its 5/2020 issue, the magazine “Heimwerker Praxis” rated an HMG WE 7-8 tilting circular saw as “upper class” and with a grade of 1.4. An excerpt from the assessment: “… a great machine with a very high safety factor that makes making firewood a fun factor. Every euro is well spent here …”
HMG machines are designed and manufactured according to principles valid machine guidelines. each machine a functional check is subjected to prior to delivery.

Boaters are to be audited, so HMG circular saws by the laboratory are checked. A valid type certificate is in any manual of the machine!

Alternative products:

Accessories: