Tilting saw petrol WSK 7V

Cutting with a combustion engine independent of electricity

 

The HMG rocking circular saw from the WSK 7V series is powered by a petrol engine via a V-belt system. The drive is geared so that a high saw blade speed is achieved for quick and easy cutting. The V-belts protect the drive system and increase work safety. Thanks to the welded square steel tube frame, it achieves the highest stability. The large rocker enables quick loading of wood from the side and eliminates the need to open the lid, which ensures more effectiveness when cutting. This system is protected by a European patent (EP 3848170). In addition, the rocker is ergonomically and smoothly designed and is easy to operate thanks to integrated tension springs. The height of the rocker handle is adjustable for comfortable operation.

  • More work safety through V-belt drive
  • Large opening of the feeding device (rocker)
  • High cutting depth of 28 cm thanks to a large saw blade with a diameter of 70 cm (30 mm hole)
  • Easy transport thanks to large wheels and a robust, extendable transport handle
  • Slidable rocker extension with section holding device
  • Wide rocker with internal galvanized rocker plate
  • Smooth rocker thanks to strong tension springs and shock absorbers
  • Individually adjustable rocker handle
  • Removable chip ejection grid for quick removal of wood and bark residues
  • A robust square steel tube construction ensures maximum stability. The welded frame is torsion-resistant and withstands the large cutting loads better than a sheet metal construction. A high-quality powder coating protects against rust.
  • The cutting protection device can be opened wide for convenient operation. The system protected by a utility model (EU-Patent EP 3848170) also has a very large opening for the wooden support device (rocker), which enables light wood assembly.
  • A circular saw driven by a V-belt has a better cutting performance because the gear ratio used results in a higher saw blade speed. In addition, work safety is increased if the V-belts can slip when blocked. The V-belt shaft is equipped with two self-lubricating industrial ball bearings and has a long bearing, which withstands the loads better than a short shaft. The V-belts are arranged on the outside, so a quick V-belt change can be carried out and the saw shaft does not have to be laboriously dismantled.
  • The rocker is designed ergonomically and smoothly and is easy to operate thanks to integrated tension springs. Galvanized exchangeable sheets protect the support device from wear.
  • The saw blade protection hood can be swiveled backwards in just a few simple steps, thus enabling the saw blade to be changed very quickly without having to laboriously dismantle the circular saw. The tool for changing the saw blade is securely attached to the machine for transport.
  • An extension that can be pulled out up to 50cm is ideal so that the cut wood does not fall on the floor and at the same time serves to determine the desired section length.

 

Large rocker opening

Quick saw blade change

Extendable extension

Removable grille

Big wheels

Stable transport handle

 

 

Rocker circular saw type WSK 7V-B WSK 7V-DI
Gasoline engine Briggs & Stratton kw 7,1 – – –
Diesel engine Texas kw – – – 6,6
Number of revolutions rpm. 1700 1700
Cutting depth rocker ca. cm 28 28
Saw blade cm 70/3 70/3
Weight kg 179 196
Dimension cm (l×w×h) 149×85×113 149×85×113
Purchase number with chrome-plated steel KV, teeth 56 614 620 no longer available!
Purchase number with carbide LFZ, teeth 42 614 621 no longer available!
Purchase number with carbide SWZ, teeth 84 614 622 no longer available!
Surcharge for electric starter with battery and battery box 687 120
Surcharge for hinged lid (only recommended if mainly large and heavy logs – over 20cm in diameter – are being cut. See description under “Highlights”) 687 200
In its 5/2020 issue, the magazine “Heimwerker Praxis” rated an HMG WE 7-8 tilting circular saw as “upper class” and with a grade of 1.4. An excerpt from the assessment: “… a great machine with a very high safety factor that makes making firewood a fun factor. Every euro is well spent here …”

 

HMG machines are designed and manufactured according to principles valid machine guidelines. each machine a functional check is subjected to prior to delivery.

Boaters are to be audited, so HMG circular saws by the laboratory are checked. A valid type certificate is in any manual of the machine!

 

Alternative products:

Accessories: